Using Bracing Panels With Your Wall

Bracing panels means you move your wall further apart without the use of crossbars. 

•  9–12 mm plywood (or 5–6 mm MDF if it’s not bearing heavy load) that ideally 1m length by 1metre width.
• Fix with 35–40 mm wood screws every 200–300 mm along the edges attracted to the 2x4 vertical posts.

Example Setup (1 m Wide, 2 m Tall Freestanding Section)

• 2 vertical posts with adjusters (top + bottom).
• 1 horizontal cross bar near the top using  L-brackets.
• 1 full plywood panel screwed from the top bar to the floor between posts.
  → This will be perfectly stable, even away from a wall
• Now it's time for installing the wall.