You will receive 8 arch transition pieces and 4 plaster transition pieces.
Arch Transition pieces help create a smooth transition between the arch and the wall. Each arch comes with 8 corner transition pieces, allowing you to adjust the size by a few centimetres during installation. You cut the pieces to size so it creates a smooth transition.
Put plaster underneath and either let it adhere wood, or alternatively drill it in and remove the screw later, and fill in the whole.
Now cover with plaster so it looks like extension of the arch.
The four plaster transition pieces, which help create a smoother finish where the curved arch meets the wall.
Now measure the width of the transition pieces and like the arch transition pieces and cut to size. Cut to transition pieces to size depending on the depth of your archway.
Install the pieces at either end where the plaster meets the wall and cover with plaster. It’s best to do this when the arch has already been installed on the wall, the plasterboard is drill in and you are ready to plaster!
Install the transition pieces to the ends of each corner. If you use screws to hold them in place, remove the screws when the plaster drys. 
0 comments